Skip to main content

Dish or recipe is appearing in Consumption Report and should not be

If there is a dish that is showing up in the Consumption Report that should not be, this article describes how you can remove it.

Written by Cristian Bolba

If you want to remove a dish that is appearing in the Consumption Report, please follow the below steps.

Step 1: Check the Master Outlet Configuration

  1. Go to the Admin Cogs icon.

  2. Navigate to Advanced Stock Controls, then Outlets/Stores.

  3. Locate and edit the outlet associated with the stock take.

  4. Review the Master outlet for product settings dropdown field.

    • If no Master Outlet is selected, continue to Step 2 using the current outlet.

    • If a Master Outlet is selected, open and edit the selected Master Outlet, then continue to Step 2.

Step 2: Update the Product Settings

  1. Go to the Admin Cogs icon.

  2. Navigate to Advanced Stock Controls, then Outlets/Stores.

  3. Locate and edit the outlet associated with the stock take.

  4. Navigate to the Products tab.

  5. Select at Configure click Produced.

  6. Search for and locate the relevant dish.

  7. Set the Usage Logged dropdown to No.

  8. Save the changes.

The dish will no longer appear in the Stock Take Consumption Report.

These settings also control recipe visibility within consumption reports.

If Produced Onsite is set to Yes and Usage Logged is set to Yes:

  • The recipe appears in the Standard view of the Consumption Report.

  • In the Product Breakdown view, consumption is correctly applied to the individual products within the recipe based on sales.

If Produced Onsite is set to No and Usage Logged is set to Yes:

  • The recipe appears in the Product Breakdown view.

  • Consumption is applied to the recipe itself rather than to the individual products associated with sales.

Related Articles
Did this answer your question?